Configuring Motion Detection Area - Lorex QLR464 Instruction Manual

Vista Pro 6 Server: Viewing Mode

CONFIGURING MOTION DETECTION AREA

To configure the camera's motion detection area:
1. Click the (
Setup
2. Click the
Motion Detection Area
Select
Camera
Figure 8.1 Motion configuration window.
3. Under Select Camera, select the camera you wish to apply the setting to.
4. Under Motion Detection Area, select
• If Partial Area is selected, you can select certain portions of the screen to detect motion
To select a certain portion of the screen, click the
preview screen of the area you wish to select. A box with a number appears in the selected
area. Repeat to add a new selection area.
Selected area for motion
detection.
Figure 8.2 Motion detection
area selection.
32
)button and then click the
button. The Motion configuration screen opens.
Full Area
tab. The Motion tab opens.
Motion
or .
Partial Area
button. Next, drag your cursor in the
Add
Preview screen
Motion Detection
settings