Motion Detection; Status Icons; Configuring Motion Detection - Lorex N881 Series User Manual

12

Motion Detection

Configure motion detection settings to ensure that events are captured according to your
preferences.

12.1 Status Icons

The system displays different icons in the bottom left–hand corner of the camera image to inform
you of motion detection events:
• Motion detection: Motion has been detected by the camera. An
tom left-hand corner of the camera image to show that motion was detected, but the system is
not recording a motion event. This is because motion recording is not enabled on the channel,
or the movement detected by the camera was not significant enough to trigger motion record-
ing. See 12.2 Configuring Motion Detection, page 42 to configure settings for motion detection
and recording.
• Motion recording: Motion-triggered video recording. An
left-hand corner of the camera image when a motion event is being recorded.

12.2 Configuring Motion Detection

Set preferences for motion detection per channel.
To configure motion detection:
1. From the Live View display, right-click to open the Quick Menu, then click Main Menu.
2. Click , then click EVENT.
3. Select a channel to configure motion detection for.
4. Check to enable motion detection on the selected channel.
#LX400113; r. 3.0/56326/56332; en-US
icon is shown in the bot-
icon is shown in the bottom
42