Click the buttons with the days of the week (
the
(24-hour clock) and
Hour
7. Click
until you reach the main viewer screen to save your settings. A message will read
OK
"Apply Setting Value" to confirm the system changes.
RETRIEVING YOUR IP AND CHANGING SYSTEM INFORMATION
You will need your system IP to log in remotely into the viewer. You can also personalize the
information on the DVR. This allows you to easily distinguish which system you are connected to
if you operate more than one system.
To retrieve your IP:
1. Click the
(
Setup
2. Click the
System Info.
Figure 5.13 System Information window.
3. Under Site Information, fill in the optional information about the DVR in the blank fields.
4. Click
, and then click
OK
you want the system to shut down.
Minute
) button. The Setup Tab opens.
button. The About window opens.
on the bottom of the window to save your settings.
Apply
), and from the drop-down menu, select
SUN~SAT
IP address and network
information
Site Information (System
Information)
23