Selecting A Save Directory And Allocating Storage Space; Installing Extra Software - Lorex QLR464 Instruction Manual

SELECTING A SAVE DIRECTORY AND ALLOCATING STORAGE SPACE

During the software installation, a save directory window opens.
Select hard drive
Figure 2.2 Selecting a save directory and allocating storage space.
To select the save directory:
• Select the hard drive in the hard drive list.
To allocate video storage space:
1. Drag the slider to the right to increase storage space; drag the slider to the left to decrease
storage space.
If you allocate a large percentage of your hard drive for video storage, your hard-drive
NOTE:
icon may show up with a red bar (in Windows Vista, 7). This is normal.
2. Click OK to continue. The software begins allocating storage space on your hard drive.
Changing a save directory and re-allocating storage space
You can change the save directory and re-allocate storage space by using the Storage
Management program.
For more information, see:
• Storage Management (See "Appendix E: Re-Allocating Storage Space" on page 72.)

INSTALLING EXTRA SOFTWARE

To install the extra software, you must access the Advanced installation menu. During setup,
instead of selecting Express installation, select Advanced then click Extras.
To install the Image Analyst and Backup Viewer software, click the Extras button in the Advanced
installation window.
For more information, see:
• Image Analyst (See "Appendix C: Using The Image Analyst Software" on page 70.)
• Backup Viewer (See "Appendix D: Using Backup Viewer" on page 71.)
Installing the Software
Drag slider to adjust video
storage space
7