Motion Tab; Configuring Camera Notifications - Lorex QLR464 Instruction Manual

Motion Tab

The Motion tab allows you to configure the actions that occur when a motion recording is detected.
For example, after a detection, the system can be set to launch in full screen or begin beeping.
To open the Motion tab:
• Click the (
Setup
Camera List
Figure 8.0 Motion tab.

CONFIGURING CAMERA NOTIFICATIONS

You can configure the type of action the system produces when motion is detected.
To configure camera notifications:
1. Under Select Camera, select a camera you wish to configure.
2. Under Local Event Notify, check off the events you want to occur when a system detects
motion.
Choices are:
Launch Fullscreen
Red Border means the screen higlights with a red border when motion is detected.
3. Under Duration, select the check box. In the Duration drop-down menu, select the duration of
how long a notification should last (5~30 seconds).
4. Click to save your settings.
OK
)button and then click the
, ,
Beep Red Border
Vista Pro 6 Server: Viewing Mode
tab. The Motion tab opens.
Motion
and .
Duration
Event notifications
Motion Detection Area button
Relay Selection
31