Configuring Advanced System Settings - Lorex QLR464 Instruction Manual

CONFIGURING ADVANCED SYSTEM SETTINGS

The Advanced System Settings window allows you to configure when your computer's auto restart
time, and other system settings.
To open the Advanced System Settings window:
1. Click the (
Setup
2. Click the
Advanced Settings
Figure 5.10 Advanced system setting window.
3. Under System Setting, configure the following:
•
Video Signal Type
• : Select check box if you want the computer to "beep" upon video loss
Video loss beep
•
Use Event (SensorMotion) Log
• Use day-light-saving time
video content that over-laps due to daylight savings time.
)button. The System tab opens.
button. The Advanced system setting window opens.
: Select or
NTSC PAL
: Select check box if you wish to enable the Sensor Motion log.
: Select the directory of where you would like the system to save
Vista Pro 6 Server: Viewing Mode
21