Backup Scenarios; Scenario A: Backing Up Video During A Specified Time - Lorex QLR464 Instruction Manual

Backup Scenarios

SCENARIO A: BACKING UP VIDEO DURING A SPECIFIED TIME

You may only want to back up your video during a specific time to conserve your storage space.
For example, a shop owner may want to back up the video content of the business between 9:00am
to 6:00pm to monitor the employees and the shop.
The shop owner also wants to back up video data every 2 days. The shop owner also wants to start
the back up on 11:00 pm on December 24th during the holiday break.
To schedule backup for a specific time:
Open the Backup Window
1. Click the (
Setup
2. Click the
Backup Setting
Enable Schedule Backup and Choose a Save Directory
1. Select the Enable schedule backup check box on the top-left corner of the window.
2. Under Backup Device Select, click the Select button and choose a save directory.
3. Select the Overwrite checkbox. This will allow your system to over-write content if the
hard-drive becomes full.
Select the Time Range to Back Up
1. Under Backup Type, select Selected Specification time Backup.
2. To set the start time, beside Start, enter 9 for the hour; beside minute, enter 0. This tells the
system to start the back up time range at 9:00am.
• To set the end time, beside End, enter 18 for the hour; beside minute, enter 0. This tells teh
system to end teh back up time range at at 6:00pm.
• Note: The time must be entered in 24-hour formats.
Figure 5.8 Scheduling recording between 9:00am to 6:00pm.
19
)button. The System tab opens.
button. The Schedule Backup Setup window opens.