CONFIGURING E-MAIL NOTIFICATION
The QLR460 series is capable of sending e-mail notifications if the system detects a motion event.
Your system must be connected to the internet before it can send out e-mails.
Prerequisites:
Before you can use E-mail Notification, you must set up a DDNS account, and enter the DDNS
information into your system. For details, see "Configuring DDNS Settings" on page 34.
To configure E-Mail notification settings:
1. Click the
(
Setup
2. Under Network Config, click the
1. Select Camera
2. Select the Use
checkbox
Figure 8.6 E-Mail notification configuration window.
3. Under Select Camera, click the camera you wish to apply the settings to. You can configure
individual cameras you want to receive notifications if an event occurs. Click the All button to
apply the settings to all cameras.
4. Under E-mail Notification, select the
)button and then click the
E-Mail Set
4. Fill in e-mail address of where to
send notification
checkbox.
Use
tab. The Network tab opens.
Network
button. The E-mail configuration window opens.
E-mail test button
Vista Pro 6 Server: Viewing Mode
3. Click Schedule
button , then drag
cursor in date grid
35