Cable Connection And Check - UNIVIEW IPSAN Series Quick Manual

(2)Device assembly and disassembly:
Please refer to the device installation instructions on the top cover of the chassis.
NOTE!

Before extending the rack to the installation position, please read the
installation instructions.

Do not apply any load on the slide rail installation equipment in the installation
position.
Please strictly follow the above precautions, otherwise the slide rail may pose a
stability hazard and the rack may tip over, causing serious personal injury.

2.4 Cable Connection and Check

1 Cable Connection
(1) Connect cables for the storage controller and DEU, as shown in the following
figure.
(2) Power on the storage controller and DEU.
(3) Switch on the storage controller.
Single controller:
6