Add Ipcs And Recording Schedule (Primary) - UNIVIEW IPSAN Series Quick Manual

4. Check the formatting results. Ensure the status is normal.
Normal RAID Status

4.8 Add IPCs and Recording Schedule (Primary)

Make sure RAID has been added and formatted successfully before you start
configuring a recording schedule.
The following steps take ONVIF as an example. You may add the IPCs with other
protocols.
1. Choose Basic > Device > Encoding Device, click +Add. The following takes ipc11
for example.
Add Device
2. Choose Basic > Recording Schedule, click +Add, select ipc11_V_1, then click OK.
36