Advertisement
3.6 Create a RAID Group/RAID LUN
1. Choose RAID > RAID Group > Local RAID Group, then click Create.
2. Create a RAID group. Check whether the number of disks under Physical
Resources is consistent with the actual number.
Recommend number of disks:
11 (RAID5) + 1 (hot standby) + 11 (RAID5) + 1 (hot standby)
11 (RAID5) + 12 (RAID5) + 1 (hot standby)
Create a RAID Group
3. Click Next. Check the information of the RAID LUN.
19
Advertisement
Need help?
Do you have a question about the IPSAN Series and is the answer not in the manual?