Advertisement
WARNING!
When installing a device, ensure that the device and the mark line on the square
hole strip on the cabinet are properly aligned in 1U. Otherwise, you are not
allowed to install the rack-mounting ear screws.
If the rack-mounting ear screws are forcibly installed without the aligning
procedure, a gap exists between the device and the tray and the device is
hanging over the square hole strip. Consequently, the device is unstable, thereby
affecting stability of the hard disks. If the hard disks are running for a long time
in such situation, many problems, such as a high read/write error rate and a high
damage rate, will arise.
Besides, the depth of the equipment cabinet is generally greater than 0.8m, and
it shall be selected according to different equipment.
Correct installation
4
Advertisement
Need help?
Do you have a question about the IPSAN Series and is the answer not in the manual?