Making Booklets From Sheet Originals [Booklet/Stitching Mode] (Only Available In Duplex Copiers) - Kyocera KM-C850 Operation Manual

Making booklets from sheet originals [Booklet/Stitching mode]
(Only available in duplex copiers)
With this mode, you can use 1-sided or 2-sided originals to make
open-faced, two-sided copies in such a way that the finished copies
can be stacked and folded into a booklet format. You can also select
to have color paper or relatively thick paper fed as front and/or
back covers to the copy sets.
Original
NOTES
• This mode is only available in duplex copiers.
• 2-sided copying is not possible from the multi-bypass
tray.
• It is possible for you to change the drawer[cassette] that
will be used to feed the cover sheets. (See "Cover
drawer[cassette]" on page 7-77.)
Inch specifications
• Only 8 " × 11", 11" × 8
1/2
A3 size copy paper can be used in this mode.
Metric specifications
• Only B5R, A4R, A4, B4, A3, 11" × 8
copy paper can be used in this mode.
If "Left" is selected as the binding direction...
Copying will be performed so that the stacked and folded pages of
the finished copies read from left to right.
Original
Copy
", 11" × 17", B5R, A4, B4 or
1/2
" or 11" × 17" size
1/2
Copy
Section 6 OTHER CONVENIENT FUNCTIONS
If "Right" is selected as the binding direction...
Copying will be performed so that the stacked and folded pages of
the finished copies read from right to left.
Original
If "Top" is selected as the binding direction...
Copying will be performed so that the stacked and folded pages of
the finished copies read from top to bottom.
Original
If you choose to add covers to your copy set(s)
It is possible for you to select whether or not to copy onto the front
and/or back cover sheets.
Do NOT copy
Copy on outside
Copy on inside
Copy on both
sides
NOTES
• The asterisk "
which copying will be accomplished.
• The illustrations above are an example of when "Left" is
selected as the binding direction.
Copy
Copy
Front cover Back cover
" indicates the side of the cover on
6-29