Kyocera KM-C850 Operation Manual page 169

2
Press the "Management Def. Set." key.
The "Managem. Def. Set." screen will be displayed.
Inch specifications
Management
Managem. Total
Management Each Mgt.
total Total
Default setting
Metric specifications
Management
Managem. Total
Management Each Mgt.
total Total
Default setting
3
Select the default setting that you want to change and then
press the "Change #" key.
Inch specifications
Managem. Def. Set.
Setting item
opy management On
Print. Managem. On
Printer error report On
Others Mgt. Reg. (print) On
opy/Printer output mgt. All
Scanner Managem. On
Fax Management On
Default setting - Management
Metric specifications
Managem. Def. Set.
Setting item
opy management On
Print. managem. On
Printer error report On
Others mgt. Reg. (print) On
opy/Printer output mgt. All
Scanner Managem. On
Fax Management On
Default setting - Management
NOTE
Perform the following procedure that corresponds to the
desired setting.
Register/Sett.
Management
Management Management
Off
edit Def. Set.
On
Register/Sett.
Management
Management Management
Off
edit Def. Set.
On
Value
hange #
Value
hange #
Section 7 COPIER MANAGEMENT
Copier function management ON/OFF
Perform the following procedure when you want to turn copy
management ON or OFF for the copier functions of this machine.
1
lose
Select "Copy management" under the "Setting item"
column on the left side of the touch panel and then press
the "Change #" key.
The "Copy management" screen will be displayed.
Inch specifications
Managem. Def. Set.
opy management
Print. Managem.
Printer error report
lose
Others Mgt. Reg. (print)
opy/Printer output mgt.
Scanner Managem.
Fax Management
Default setting - Management
Metric specifications
Managem. Def. Set.
opy management
Print. managem.
Printer error report
Others mgt. Reg. (print)
opy/Printer output mgt.
Scanner Managem.
Fax Management
Default setting - Management
lose
2
To turn copy management ON for the copier functions of
this machine, press the "On" key.
Inch specifications
opy management
opy management can be set up.
lose
Default setting - Management - Managem. Def. set.
Metric specifications
opy management
opy management can be set up.
Default setting - Management - Managem. Def. set.
NOTE
If you want to quit the displayed setting without changing
it, press the "Back" key. The touch panel will return to the
screen in step 1.
3
Press the "Close" key.
The touch panel will return to the screen in step 1.
Setting item Value
On
On
On
On
All
On
On
Setting item Value
On
On
On
On
All
On
On
Off
On
Off
On
lose
hange #
lose
hange #
Back lose
Back lose
7-29