Kyocera KM-C850 Operation Manual page 200

Section 7 COPIER MANAGEMENT
Changing the management code
Perform the following procedure to change the management code
used by the copy manager.
IMPORTANT!
If you change the management code from its factory
default, be sure to keep some sort of record of the new
management code. If, for any reason, you forget the
registered management code, you will need to contact
your service representative.
1
Display the "Machine default" screen.
(See "Accessing the machine default settings" on
page 7-44.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
2
Select "Management code change" ["Change MGMT code
with #"] under the "Default menu" column on the left side of
the touch panel and then press the "Change #" key.
The "Management code change" ["Change MGMT code with
#"] screen will be displayed.
Inch specifications
efault setting / Counter
Machine default
efault menu
Silent mode
ate/Time
Time difference
Management code change
Auto sleep
efault setting
Metric specifications
efault setting / Counter
Machine default
efault menu
Silent mode
ate/Time
Time difference
Change MGMT code with #
Auto sleep
efault setting
7-60
Language Management
Bypass Counter
setting check
User
Register Print
orig. size report Adjustment
Language Management
Bypass Counter
setting check
User
Register Print
Adjustment
orig. size report
Setting mode
Off
01/01/'03 14:00
GMT+00:00
3100
Change #
On
Setting mode
Off
01/01/'03 14:00
GMT+00:00
3100
Change #
On
3
Use the keypad to enter a new 4-digit management code.
Inch specifications
Management code change
Able to change management code.(# key)
Default setting - Machine default
Metric specifications
hange MGMT code with #
Able to change management code. (# key)
nd
Default setting - Machine default
NOTE
If you want to quit the displayed setting without changing
it, press the "Back" key. The touch panel will return to the
screen in step 2.
4
Press the "Close" key.
nd
The touch panel will return to the screen in step 2.
5
Press the "Close" key once again.
The touch panel will return to the "Default setting" screen.
6
Press the "End" key.
The touch panel will return to the contents of the "Basic"
tab.
Close
Up
own
Close
Up
own
Back lose
Back lose