Kyocera KM-C850 Operation Manual page 160

Section 7 COPIER MANAGEMENT
4
Verify that this is the ID-code that you want to delete, and
press the "Yes" key.
The touch panel will return to the screen in step 3.
Inch specifications
ID-code:
Name to display:
Metric specifications
ID-code:
Name to display:
NOTE
If you want to delete another ID-code, repeat steps 3 and
4.
5
Press the "Close" key.
The touch panel will return to the screen in step 2.
7-20
01
1st ales Dept.
Are you sure you want to delete this ID-code?
Yes No
01
1st ales Dept.
Are you sure you want to delete this ID-code?
Yes No
Change registered information
Perform the following procedure when you want to change a
previously registered department name or the corresponding
ID-code.
1
top
Access the copy management menu screen.
(See "Accessing the copy management menu screen"
on page 7-3.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
top Machine
default
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
2
Press the "Management edit" key.
The "Management edit" screen will be displayed.
Inch specifications
Management
Managem. Total
Management
total
Default setting
Metric specifications
Management
Managem. Total
Management
total
Default setting
Language
Bypass
setting
Register
orig. size
Language
Bypass
setting
Register
orig. size
Register/Sett.
Each Mgt. Management Management
Total edit Def. Set.
Register/Sett.
Each Mgt. Management Management
Total edit Def. Set.
nd
Management
Counter
check
Print User
Adjustment
report
nd
Management
Counter
check
Print User
Adjustment
report
lose
Management
Off
On
lose
Management
Off
On