Maintenance; Fuse Replacement - Icom IC-3210A Instruction Manual

MAINTENANCE 8
. POSSIBLE CAUSE |
e Squelch is open.
9 Scan does not
operate.
e Set squelch threshold point.
e Scan edge A equals B (for
9 Reset scan edges.
programmed scan).
e Cancel the memory skip
function in the desired
channel.
9 All memory channels are
programmed as the skip
channel (for memory scan).
e Replace the backup bat-
tery.
e Data error occurred in the
CPU RAM because of the
following problems.
- The backup battery is
empty.
- The CPU has been
damaged by static.
9 All programmed
memories have been
erased.
Reset the CPU.
è Select VFO mode then
push [SET].
e SET mode can not
be accessed.
e Memory mode is selected.
8-2 FUSE REPLACEMENT Locate the cause before replacing a blown fuse.
eDClinefuse : 15A Ἢ