Advertisement
5
3 INSTALLATION
To obtain maximum
performance from the trans-
ceiver, select a high-quality
antenna and a good
location for it.
Roof-mount antenna
(Drill a hole or use a magnetic mount.)
N
Trunk-mount antenna
Bumper-mount antenna
(Best location for long whip antennas.)
Slide the coupling ring over the coaxial
cable.
Strip only the cable jacket and
ft
solder.
Coupling ring
— 10mm (Soft solder)
EAD
ome
Strip the cable as shown
at left.
Tin
the
center
conductor
and
the entire
length of the exposed braid.
1~2mm
Solder Solder
Slide the connector body over the cable
and solder as shown at left.
separate antennas for each band.
Advertisement
Need help?
Do you have a question about the IC-3210A and is the answer not in the manual?
Questions and answers