Icom IC-3210A Instruction Manual page 16

Ὁ BASIC OPERATION
5-2 RECEIVING
1) Power ON.
5) Set freq.
2) Adjust audio.
a=
SS
3) Adjust SOL.
6) Push for monitor.
4) Select band.
1) Push [ON/VOL] to turn ON the power and
rotate [SOL/MONITOR] maximum counter-
clockwise.
2) Rotate [ON/VOL] to the desired audio level.
3) Rotate [SOL/MONITOR] to the
threshold point.
squelch
4) Push [BAND] to select the desired band (VHF
or UHF).
5) Set the desired frequency with the tuning con-
trol or the microphone [UP] [DN] switches.
eWhen a signal is received, audio is emitted
from the speaker and the S/RF indicator dis-
plays the relative signal strength.
6) Push [SOL/MONITOR] to operate the monitor
function, if desired.