Dimmer Control; Lock Function - Icom IC-3210A Instruction Manual

6-6 DIMMER CONTROL
The display for the
brightest intensity.
6-7 BEEP ON/OFF
FUNCTION
The display shows
that the beep is ON.
6-8 LOCK FUNCTION
1) Push [VFO/M] to access the VFO mode.
2) Push [SET] until "d-1," "d-2," "d-3'" or ''d-4"
appears on the function display.
3) Rotate the tuning control for the desired light-
ing intensity.
4) Push [VFO/M] to return to the VFO mode.
The speaker emits a beep each time a switch is
pushed. To turn OFF the beeps, use the SET
mode. |
1) Push [VFO/M] to access the VFO mode.
2) Push [SET] until "b-on" or "b-oFF"' appears
on the function display.
3) Rotate the tuning control to select "b-oFF.''
e To turn ON the beeps again, rotate the tuning
control to select *'b-on."
4) Push [VFO/M] or [SET] to leave the SET
mode.
1) To lock switches and controls, push [LOCK].
e "L" appears on the function display.
e [SSOL/MONITORI], [ON/VOL] and [PTT]
remain unlocked.
2) To unlock the switches and controls, push
[LOCK] again.