Repeater Operation - Icom IC-3210A Instruction Manual

5 BASIC OPERATION
5-4 REPEATER OPERATION When working a repeater, set the transceiver to
duplex. To access the repeater with a tone, see
below.
1) Push [DUP] once for —duplex and again for
+duplex.
1) Select duplex.
e "DUP—" or "DUP" appears on the function
display.
"DUP-—" : Transmit freq. =
Receive freq. — Offset freq.
"DUP" : Transmit freq. =
Receive freq. + Offset freq.
e The VHF and UHF offset frequencies are
independently programmed.
2) Push [PTT] to transmit on the repeater input
frequency.
e When a tone is required to access the repeater,
see below.
3) To check the transmit frequency (repeater
input frequency) while receiving, push
[SQL/MONITOR].
e The squelch or the tone squelch opens.
T/T.SQL
"TONE" appears on the
function display.