Above-Floor Cleaning; Maintaining Your Vacuum - Shark POWERDETECT IP3000 Series Owner's Manual

ABOVE-FLOOR CLEANING

FPO
ABOVE-FLOOR WITH HAND VACUUM
Detach the hand vacuum to clean above-floor
areas. Press the front latch release button on
the hand vac where it meets the wand, then lift
off the hand vacuum. To attach an accessory
to the hand vacuum, slide it into the opening
in the nozzle. To remove, press the front latch
release button on the hand vac where it meets
the wand, and slide out the accessory.
MULTIFLEX® WAND
If your vacuum model includes the MultiFLEX
wand, you can adjust the angle to clean
under furniture and in other hard-to-reach
areas. Press the latch on the back of the
wand to adjust the angle. To return to the
original angle, straighten the wand until it
clicks securely into place.
s h a r kc l e a n . c o m
FPO
ABOVE-FLOOR WITH WAND
To detach the floor nozzle from the wand,
step on the nozzle while pressing the
nozzle release button at the bottom of
the wand. Lift the wand to remove it. To
reattach the wand, align it over the neck
of the floor nozzle, then slide it on until it
clicks into place.
Press the latch on the back of the wand and
fold the vacuum down into storage position.
Lean the folded unit against a wall or other
surface for more support.

MAINTAINING YOUR VACUUM

EMPTYING THE DOCK DUST BIN
FPO
Empty the dock dust bin when the Dust Bin
Full indicator light comes on. To remove the
bin, lift it out by the handle.
EMPTYING THE HANDHELD VACUUM DUST CUP
FPO
To empty the handheld vacuum (IP1000
Series) dust cup, turn off the power and hold
the hand vac over the trash. Press the release
button and the dust cup lid will drop open,
releasing debris.
FPO
To empty the bin, hold it over the trash and
press the release button on the side. The
bottom will open to release the debris.
FPO
s h a r kc l e a n . c o m