Above-Floor Cleaning - Shark Cordless Detect Pro IW1600 Series Owner's Manual

ABOVE-FLOOR CLEANING

ABOVE-FLOOR WITH HAND VACUUM
Detach the hand vacuum to clean above-
floor areas. Press the front latch release
button on the hand vac where it meets the
wand, then lift off the hand vacuum. To
attach an accessory to the hand vacuum,
slide it into the opening in the nozzle. To
remove, press the front latch release button
on the hand vac where it meets the wand,
and slide out the accessory.
NOTE: All accessories are compatible with both the wand and the hand vacuum.
s h a r kc l e a n . c o m
ABOVE-FLOOR WITH WAND
To detach the floor nozzle from the wand,
step on the nozzle while pressing the
nozzle release button at the bottom of
the wand. Lift the wand to remove it. To
reattach the wand, align it over the neck
of the floor nozzle, then slide it on until it
clicks into place.
MAINTAINING YOUR VACUUM
EMPTYING THE DOCK DUST BIN
The dock dust bin holds up to 30 days' worth
of dust and debris. Empty the dock dust bin
when the dust bin full indicator light comes on.
To remove the bin, lift it out by the handle.
EMPTYING THE HANDHELD VACUUM DUST CUP
To empty the handheld vacuum (IW3600
Series) dust cup, turn off the power and hold
the hand vac over the trash. Press the release
button and the dust cup lid will drop open,
releasing debris.
To empty the bin, hold it over the trash and
press the release button on the side. The
bottom will open to release the debris.
To empty the handheld vacuum (IW1600
Series) dust cup, turn off the power and hold
the hand vac over the trash. Press the release
button and the dust cup lid will drop open,
releasing debris.
s h a r kc l e a n . c o m