Shark POWERDETECT IP3000 Series Owner's Manual page 3

AUTO-EMPTY ASSEMBLY (IP3000)
1. Slide the Wand onto the neck of the Floor
Nozzle until it clicks into place.
2. Align the Hand Vacuum nozzle opening
with the top of the wand and slide it on
until it clicks into place.
3. Make sure the Dock is facing upright. Slide
the Charging Post into the slot on front of
dock until it clicks.
Handheld
Vacuum
2.
(Click)
MultiFLEX®
Wand
1.
(Click)
Floor Nozzle
NOTE: Once the charging post is installed, it can't be removed.
s h a r kc l e a n . c o m
4. Place the dock on the floor near a wall
outlet. Plug the Power Cord into the outlet.
5. Store the crevice tool accessory on the
mount on the dock.
6. Refer to pages 5 and 6 for Odor
Installation and Replacement instructions.
For proper operation, ensure all components
are completely connected and clicked
into place.
3.
Charging Post
6.
Odor Neutralizer
Technology
Cartridge
4.
Power Cord
Dock
5.
Accessory
Storage
NON-AUTO-EMPTY ASSEMBLY (IP1000)
1. Slide the Wand onto the neck of the Floor
Nozzle until it clicks into place.
2. Align the Hand Vacuum nozzle opening
with the top of the wand and slide it on
until it clicks into place.
Handheld
Vacuum
2.
(Click)
MultiFLEX®
Wand
1.
(Click)
Floor Nozzle
For proper operation, ensure all components
are completely connected and clicked
into place.
s h a r kc l e a n . c o m