Rapid Configuration; Step 1 - Connect The System - Datalogic DS4800 Reference Manual

RAPID CONFIGURATION

1 RAPID CONFIGURATION
This chapter illustrates a Stand Alone application. For other types of
installations, such as ID-NET™, Fieldbus, Pass-Through, Multiplexer Layout,
etc., refer to chapters 4, 5 and 6. For complete scanner configuration using the
Genius™ configuration program, refer to the Context-Sensitive Help On-Line.
NOTE
STEP 1 – CONNECT THE SYSTEM
To connect the system in a Stand Alone configuration, you need the hardware indicated in
Figure 1.
In this layout the data is transmitted to the Host on the main serial interface.
In Local Echo communication mode, the RS232 auxiliary interface can be used to transmit
data independently from the main interface selection.
When On-Line Operating mode is used, the scanner is activated by an External Trigger
(photoelectric sensor) when the object enters its reading zone.
PG 6000
DS4800
MAIN
CBX100/500
* I/O, AUX
P.S.
Figure 1 – DS4800 in Stand Alone Layout
Host
* Presence Sensor
(for On-Line mode)
1
1