Installing Accessory Boards - HP Vectra XW User Manual

Configuring Plug and
Play with the Setup
Program
3 How to Install Accessories Inside Your Personal Workstation

Installing Accessory Boards

Installing Accessory Boards
The Personal Workstation has six accessory board slots:
Slot AT 1 (the bottom slot) for full-length 16-bit ISA boards
•
Slot AT 2 for full-length 16-bit ISA boards
•
Slot AT 3/PCI 4 for either a full-length 32-bit PCI or a 16-bit ISA
•
board
Slot PCI 3 can be used for a full-length 32-bit PCI board
•
Slot PCI 2 for a full-length 32-bit PCI board
•
Slot PCI 1 (the top slot) for a full-length 32-bit PCI board.
•
You can use the Setup program to select the level of support provided
by the system BIOS for Plug and Play-compatible accessory boards.
1 Turn on the Personal Workstation and press
appears.
2 Highlight the
PnP Board Activation
select .
Full
When is selected, all Plug and Play accessories will be
Full
initialized by the BIOS. However, you will need to determine a
conflict-free setting for the board.
3 Press to save your selection and exit from the Setup program.
46 English
when
<Setup=F2>
line and use or to