HP Vectra XW User Manual page 112

Advanced Configuration
Options Menu
4 Troubleshooting Your Personal Workstation and Using the Setup Program
Using the HP Setup Program
• Send Start Unit Command
This option is not supported by some SCSI devices. Some SCSI
devices require a jumper to be changed before they can respond to
this command.
When set to
Yes
power supply by allowing the interface to power-up SCSI devices
one-at-a-time when you start your computer. When set to
SCSI device powers up at the same time.
It is recommended that these settings not be changed.
Advanced Configuration Options
Plug and Play Scam Support .................................. Enabled
Options Listed Below Have NO EFFECT if the BIOS is Disabled
Interface BIOS (Configuration Utility Reserves BIOS Space) .. Enabled
Support Removable Disks Under BIOS as Fixed Disks ........... Boot Only
Extended BIOS Translation for DOS Drives > 1 GByte .......... Enabled
Display <F6> Message During BIOS Initialization ............. Enabled
Multiple Lun Support ........................................ Disabled
BIOS Support for More Than 2 Drives (MS-DOS 5.0 and above) .. Enabled
Arrow keys to move cursor, <Enter> to select option, <Esc> to exit
Use the and
display a menu with a selection of values.
• Plug and Play Scam Support
When enabled, this option automatically configures Plug and Play
compatible SCSI devices. For SCSI devices that do not support Plug
and Play, set this option to
• Interface BIOS
The Interface BIOS is enabled by default.
100 English
this option reduces the load on your computer's
SCSISelect(TM) Utility v1.xxx
keys to move between options. Press
Disabled
. By default, it is enabled.
each
No
to