Replacing The Cover After Installing Accessories - HP Vectra XW User Manual

3 How to Install Accessories Inside Your Personal Workstation
Removing and Replacing the Cover

Replacing the Cover after Installing Accessories

1 Check that you have installed all your accessories (and removed a
plastic panel from the front of the cover, if you installed a disk drive
in a front shelf).
2 Check that all internal cables are safely routed.
3 Check that the cover is unlocked and the latches are outwards.
4 Place the cover in front of the computer and ensure that the two lips
at the bottom of the case slide onto the two rails at the base of the
computer.
Check that the lips at the
bottom of the case slide
onto the rails at the base
of the computer
5 Slide the cover into position.
40 English
Slide the cover
into position