Connecting Audio Accessories - HP Vectra XW User Manual

WARNING

Connecting Audio Accessories

Your Personal Workstation has a Headphones jack and a Microphone
jack on the front panel. An audio Stereo In jack, an audio Stereo Out
jack, and a MIDI interface connector are located on the rear panel.
To avoid discomfort from unexpected noise, always turn the volume
down before connecting headphones or speakers.
Listening to loud sounds for prolonged periods may permanently
damage your hearing.
Before putting on headphones, place them around your neck and turn
the volume down. When you put on the headphones, slowly increase
the volume until you find a comfortable listening level, and leave the
volume control in that position.
1 Setting Up Your Personal Workstation
Connecting Audio Accessories
MIDI connector
Stereo In jack
Stereo Out jack
NOTE
The internal speaker and the
Stereo Out jack on the rear of
your Personal Workstation are
deactivated when you use the
Headphones jack.
The internal speaker is
deactivated when you use the
Stereo Out jack.
Note that external speakers
should have built-in amplifiers.
The audio accessories shown
here (headphones, microphone,
speakers, and hifi system) are
not supplied with your Personal
Workstation.
7