HP Vectra XW User Manual page 113

4 Troubleshooting Your Personal Workstation and Using the Setup Program
• Support Removable Disks Under BIOS as Fixed Disks
When
Boot Only
designated as the boot device is treated as a hard disk drive.
If is selected, all removable-media drives supported by
All Disks
the BIOS are treated as hard disk drives.
No removable-media drives are treated as hard disk drives when
is selected.
Disabled
• Extended BIOS Translation for DOS Drives >1 GByte
This option is enabled by default with the following translation
schemes:
SCSI hard disks
32 sectors per track
SCSI hard disks > 1 GByte use a translation scheme of 255 heads,
63 sectors per track.
• Display <F6> Message During BIOS Initialization
When enabled, this option displays the message
SCSISelect Utility
this message is not displayed, although you can still press
SCSISelect utility. This option is enabled by default.
• Multiple Lun Support
More advanced SCSI drives can have several logical units. This
option lets you enable and disable support for SCSI devices with
multiple logical units. It is disabled by default.
• BIOS Support for More Than 2 Drives
This option is only available if the interface BIOS is enabled. It lets
you enable or disable BIOS support for between two to eight SCSI
hard disk drives. This feature is supported by DOS 5.0 and above.
is selected, only the removable media drive
1 GByte use a translation scheme of 64 heads,
during BIOS initialization. When disabled,
Using the HP Setup Program
Press <F6> for
for the
English 101