Installing Main Memory; Main Memory Modules - HP Vectra XW User Manual

CAUTION
3 How to Install Accessories Inside Your Personal Workstation

Installing Main Memory

Installing Main Memory

Main Memory Modules

Your Personal Workstation is supplied with main memory. If you need
more main memory to run your application software, you can install up
to a total of 512 MB. Main memory upgrades are available in pairs of 16
MB, 32 MB, or 64 MB.
Memory modules must be installed in identical pairs of the same size
and same type (a pair of ECC or a pair of non-ECC) from bank A, up to
bank D. For a list of available memory modules, refer to the beginning
of this chapter, or contact your authorized HP dealer.
Error correcting will be disabled if any non-ECC memory is installed.
Static electricity can damage electronic components. Turn all
equipment OFF. Don't let your clothes touch the accessory.
To equalize the static electricity, rest the accessory bag on top
of the power supply while you are removing the accessory
from the bag. Handle the accessory as little as possible and
with care.
To install a pair of main memory modules:
1 Disconnect the computer's power cord and any telecommunications
cable.
2 Remove the computer's cover (see page 38). The location of the
memory modules is shown here.
44 English