Removing And Replacing The Cover; Removing The Cover - HP Vectra VEC 7 Maintenance Manual

WARNING

Removing and Replacing the Cover

For your safety, never remove the PC's cover without first removing
the power cord from the power outlet, and any connection to a
telecommunications network. Always replace the cover before
switching on the PC again.

Removing the Cover

1 Switch off the display and the PC.
2 Disconnect all power cords and any telecommunications cables.
3 Unscrew the three thumb screws at the back of the PC. If it is the
first time you are removing the cover, you will probably need to use
a screwdriver to loosen the screws.
4 While standing at the back of the PC, slide the cover towards you by
about 20 mm (about 1 inch) and then lift it off the PC chassis.
1 How to Install Accessories in Your Desktop PC
Step 4
Removing and Replacing the Cover
Step 3
English 3