HP Vectra VEC 7 Maintenance Manual page 91

Hp vectra vec 7: supplementary guide
Hide thumbs Also See for Vectra VEC 7:
Table of Contents

Advertisement

6 While pressing
CTRL
ROM file AMIBOOT.ROM from the floppy disk and flashes the BIOS.
This takes several minutes. When the flashing is complete, the PC
reboots automatically.
7 Shut down the PC and disconnect the PC's power cord.
8 Remove the cover and set switches 5 and 6 back to the Off position.
9 Replace the cover, reconnect all power cords and cables, remove the
floppy disk from the floppy disk drive, and switch on the PC.
The PC should boot normally.
+
switch on the PC. BootBlock loads the
HOME
4 Troubleshooting Your PC
Recovering from a BIOS Update Failure
English
81

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vectra ve 7 series

Table of Contents