HP Vectra VEC 7 Maintenance Manual page 21

4 Remove the two retaining screws from the floppy disk/hard disk
drive tray, and then carefully lift the tray from the PC. Place the tray
on a table/desk top.
5 Insert the new drive into the spare shelf in the drive tray and secure
the new drive to the tray using the screws provided with the drive.
6 Carefully put the drive tray back into the PC, and secure it in position
using the two retaining screws that you removed earlier.
1 How to Install Accessories in Your Desktop PC
Installing Mass Storage Devices
Floppy disk/hard
disk drive tray
Screws go here
(and the same on
the other side)
English 11