Wenger Conductor’s Chair Assembly Instructions

Table of Contents

Download this manual

Contents

Important User Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Manufacturer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Intended Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Note: Please read and understand these instructions before assembling.

Note: If you need additional information, contact Wenger Corporation using the information below.

©Wenger Corporation 2019

Wenger Corporation, 555 Park Drive, P.O. Box 448, Owatonna, Minnesota 55060-0448

Questions? Call.....USA: (800) 4WENGER (493-6437) • Worldwide: +1-507-455-4100 • wengercorp.com

Chair Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Chair Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Swivel Lock Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Seat Angle Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Printed in USA 2019-05

Assembly Instructions

Conductor's Chair

Part #157C002-04

Table of Contents

Need help?

Do you have a question about the Conductor’s Chair and is the answer not in the manual?

Page 1 Hardware ..........2 Note: Please read and understand these instructions before assembling. Note: If you need additional information, contact Wenger Corporation using the information below. ©Wenger Corporation 2019...
Page 2 Wenger Corporation. Wenger Corporation does not assume any responsibility for any errors that may appear in these instructions. In no event will Wenger Corporation be liable for technical or editorial omissions made herein, nor for direct, indirect, special, incidental, or consequential damages resulting from the use or defect of these instructions.
Page 3 Chair Assembly 1. Select the appropriate holes for the back rest placement. 1/4” Lock Washers 1/4-20 x 1" Forward Capscrews (Percussionist) Rear Back Center (Conductor) Rest (String Bass) Seat Cushion Select Hole Set 2. Attach the back rest to the bottom of the seat cushion using four 1/4”...
Page 4 Chair Options Swivel Lock Option The swivel lock option prevents the seat from being rotated side-to-side. Front 1. Separate the seat from the base. holes 2. Attach the swivel lock (4) to the front holes of the Swivel back rest using the original fasteners. Lock Orient the swivel lock as shown.