Cable & Connector Configurations
Introduction
The following pages contain information about standard interface cables for
use in interconnecting the Dock to power and/or peripheral devices.
General Specifications
Wire Requirements
Supply Voltage
Current power supply voltage = 12V, 2.5 amp.
USB Cable
Figure E-1
con.
Figure E-1. USB Connector Configurations
Product Reference Guide
•
Cable length should not exceed 15 feet.
•
Wire gauge = Standard for RJ-45 connectors (28-26 AWG).
illustrates the connector configuration of the USB cable for the Fal-
4
3
PC END
Appendix E
1
72.0" ±2.0"
5
FALCON END
E-1