Table of Contents
Advertisement
Network and Dialup
To change the Network and Dialup connection settings, complete these
steps:
Figure 2-18. Changing Network & Dialup Settings.
Product Reference Guide
1. Select
Start > Settings > Network and Dialup Connections
2. Double-tap the connection to view or change the settings. The
item shown in the example above can vary, depending
SDCCF10G1
on the radio installed and the number of connections.
3. Complete the two tabs as shown in
•
: Select
IP Address
•
: If using static IP, set
Name Servers
Figure 2-18
DHCP
or set static IP settings.
DNS
Network and Dialup
.
:
WINS
and
servers.
2-27
Advertisement
Table of Contents
