Cables; Connectors And Terminator; Scsi Configuration Constraints - HP J Class Owner's Manual

SCSI
Restrictions
This section describes the SCSI restrictions that apply to your work-
station in the following areas:

Cables

Connectors and terminator

SCSI configuration constraints

Cables
All SCSI devices ship without cables. Only SCSI cables approved by
HP can be used to connect your workstation and any SCSI devices.
HP offers the following SCSI cables for single-ended standard SCSI
devices:
K2296 cable with 0.9 meter (3 feet) length
K2297 cable with 1.5 meter (5 feet) length
HP offers the following SCSI cables for connecting externally con-
nected devices to the system fast, wide port:
C2911A cable with 0.9 meter (3 feet) length
C2924A cable with 2.5 meter (8.2 feet) length
C2925A cable with 10.0 meter (32.8 feet) length
C2926A cable with 20.0 meter (65.6 feet) length
CAUTION: SCSI cables approved by HP are designed to
function within the SCSI tolerances for HP de-
vices. Use of other cables can result in signifi-
cant problems with system operation.
C-5