HP J Class Owner's Manual page 42

Hardware Station
Path Address
2.0.2 0x0800091595EE 0
1-24
Terminal Control
A terminal window opens.
3.
Move the mouse cursor into the terminal window and single-
click the left mouse button.
4.
If you are using HP-UX 9.05, enter the following at the prompt:
/etc/lanscan
If you are using HP-UX 10.0 or later, enter the following at the
prompt:
/usr/sbin/lanscan
You will see a table similar to the following.
Dev Hardware Net-Interface
lu State NameUnit State ID
UP lan0
The LANIC ID in this example is 0800091595EE.
Enter
Enter
NetMgt
UP 4
Encapsulation
Methods
ETHER IEEE8023