HP J Class Owner's Manual page 105

5-6
After a few moments the ioscan utility lists all of the SCSI I/O
devices it could find. If there is a SCSI floppy drive in the list,
that listing appears similar to the following:
H/W Path Description
==============================
2.0.1.0.0 floppy_drive
If you are using HP-UX 10.0, enter the following at the prompt:
/usr/sbin/ioscan –d sflop
After a few moments the ioscan utility lists all of the SCSI
floppy I/O devices it could find. The list appears similar to the
following:
H/W Path Class
============================================
bc
8 bc
8/12 ba
8/12/5
8/12/5.0
8/12/5.0.0
If ioscan does not see your floppy drive it returns the following
message:
ioscan: No hardware found
If you receive this message, go to Chapter 6, "Solving Prob-
lems."
Status
ok(nnnnnn)
Enter
Description
I/O Adapter
Core I/O Adapter
ext_bus Built-in SCSI
target
disk TEAC FC-1 HF 07