HP J Class Owner's Manual page 131

Checking the
SCSI IDs
To determine which SCSI IDs are currently in use on your system,
use the ioscan command in a terminal window:
1.
Click on the Terminal Control on the Front Panel of your
Workspace.
Terminal Control
A terminal window opens.
2.
Move the mouse cursor into the terminal window and single-
click the left mouse button.
3.
If you are using HP-UX 9.05, enter the following at the prompt:
/etc/ioscan –d scsi
After a few moments the ioscan utility lists all of the SCSI I/O
devices it could find. The list should appear similar to the fol-
lowing:
H/W Path Description
====================================
2.0.1.2.0 cd-rom_drive
Enter
Status
ok(nnnnnnnn)
B-3