HP J Class Owner's Manual page 83

4-2
This chapter describes how to perform tasks that archive to and trans-
fer data from the optional DDS tape drive. It also describes how to
maintain and care for the drive. We assume the DDS tape drive is set
to the factory default address of SCSI ID 3.
The instructions in this chapter assume you are using the HP-UX
version 9.05 or later operating system with the HP VUE version 3.0
interface.
CAUTION: Use only data cassettes labeled DDS (Digital
Data Storage) cassettes. Never use audio cas-
settes labeled DAT (Digital Audio Tape) in your
DDS-format drive.