Displaying The Current Monitor Configuration - HP J Class Owner's Manual

The monitor command lets you change your workstation's graphics
configuration before you replace your monitor. For information about
changing the configuration after you replace your monitor, go to the
section "Changing Your Monitor Type" in Appendix B of this book.

Displaying the Current Monitor Configuration

To display the current monitor configuration for your system from the
Configuration Menu of the boot console interface, follow the direc-
tions in "Accessing the Boot Console Interface" earlier in this appen-
dix. Once you are in the Boot Console Interface Main Menu, type:
Main Menu: Enter a command or a menu > configuration
This places you in the Configuration Menu. From here type:
Configuration Menu: Enter command > monitor
The screen displays a list of the current monitors configured for your
workstation.
MONITOR INFORMATION
Slot # HPA
––––––––– ––––––––––
graphics0 f8000000
graphics1 f4000000
graphics2 f6000000
graphics3 fa000000
Current Console Path:
Stable Store Console Path:
In this example, the graphics cards are configured as follows:
only card in the system and be physically located
in slot 0.
State Resolution
––––––– ––––––––––
Present 1280x1024
Present Fixed
Empty
Present 1280x1024
core.RS232_.9600.8.none
GRAPHICS0
Graphics slot 0
Graphics slot 1
Graphics slot 2
Graphics slot 3
Enter
Enter
Frequency
–––––––––
72Hz
72Hz
Dual Color Graphics Card
CRX48Z
Empty
Second head on dual card in slot 0
Class
–––––––
D-15