Setting up the monitor
Installing the monitor stand
CAUTION: Do not touch the surface of the LCD panel. Pressure on the panel may cause non-uniformity
of color or disorientation of the liquid crystals. If this occurs, the screen will not recover to its normal
condition.
1. Place the monitor face down on a flat and clean surface.
2. Unpack the base, one hand hold the monitor, the other hand to pivot the stand (1).
3. Insert the base (2) into the stand.
4. Turn the screw clockwise (3) to attach the base to the monitor.
1
Connecting the cables
NOTE: The monitor ships with select cables. Not all cables shown in this section are included with the
monitor.
1. Place the monitor in a convenient, well-ventilated location near the computer.
2. Before connecting the cables, route the cables through the cable routing hole in the center of the
stand.
3
2
1
Getting Started
5