Connecting The Cables - HP HC241 User Manual

If installing a stand (sold separately), position the monitor facedown on a flat surface covered with protective
sheet foam or a nonabrasive cloth. This prevents the screen from getting scratched, defaced, or broken and
prevents damage to the control buttons.

Connecting the cables

1. Place the monitor in a convenient, well-ventilated location near the computer.
2. Connect a video cable.
NOTE:
be selected through the OSD menu by pressing the
Connect one end of a DisplayPort cable to the DisplayPort port on the rear of the monitor and the
●
other end to the DisplayPort port on the source device.
Connect one end of an HDMI cable to the HDMI port on the back of the monitor and the other end to
●
the HDMI port on the source device.
8 Chapter 1 Getting Started
The monitor will automatically determine which inputs have valid video signals. The inputs can
Menu button and selecting Input Control.