1. Manuals
  2. Brands
  3. Hytronik Manuals
  4. Security Sensors
  5. HIR09 Series
  6. Manual

Hytronik HIR09 Series Manual

Pir sensors for highbay and lowbay luminaires
Hide thumbs

Advertisement

Table of Contents

PIR Sensors for Highbay and Lowbay Luminaires
HIR09x, HIR10 PIR Sensor Heads
Built-in Detachable Version
Applications
These PIR sensor heads are specially designed for highbay and lowbay lumianire designs. Offering IP65 / IP64 miniaturised
designs, they allow the luminaire designer freedom of placement for high performance lighting controls with aesthetically
pleasing results.
They work with HC038V, HCD038 1-10V or DALI base units for use with your preferred LED driver, or for further space and
cost reduction, connect directly with our Hex-drive
Car Parks
High-bay / Low-bay Warehouse
Cold storage rooms
Clean rooms
HIR09/S
IP64 surface mounting PIR unit (fascia only) with daylight harvest photocell. Up to 12m mounting
height for highbay applications.
HIR09/F
IP64 PIR unit (fascia only) with daylight harvest photocell and ush mount xing ring. Up to 12m
mounting height for highbay applications.
HIR09/C
IP64 PIR unit (fascia only) with daylight harvest photocell. Features moulded threaded bolt for screw
xing to the luminaire. Up to 12m mounting height for highbay applications.
HIR10
IP65 PIR sensor heads with daylight harvest photocell. Flush mount xing and low pro le design.
HIR10 designed or up to 12m highbay luminaire designs.
Technical Data For Sensor Heads
PIR Sensor Properties
Sensor principle
Operation voltage
Detection range
*
Detection angle
range of LED drivers.
TM
PIR detection
5VDC
HIR09x ( O x H) 16m x 12m
HIR10 ( O x H) 18m x 6m x 15m
360
O
Environment
Operation temperature
Relative Humidty
IP rating
* The detection range is heavily in uenced by antenna
placement (angle of approch) and different walking paces.
It may be reduced under certain conditions.
Ta: -20
O
C ~ +50
O
C
20% - 90%
IP65

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HIR09 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Hytronik HIR09 Series

Summary of Contents for Hytronik HIR09 Series

  • Page 1 PIR Sensors for Highbay and Lowbay Luminaires HIR09x, HIR10 PIR Sensor Heads Built-in Detachable Version Applications These PIR sensor heads are specially designed for highbay and lowbay lumianire designs. Offering IP65 / IP64 miniaturised designs, they allow the luminaire designer freedom of placement for high performance lighting controls with aesthetically pleasing results.

  • Page 2: Dimensions And Terminals

    Occupancy Detection HIR09x HIR10 Radial movement 10m Tangential movement 16m *The detection patterns are based upon 5km/h movement speed. Dimensions and Terminals PIR Sensor Head Lens Housing A. HIR09/S Surface mounting Daylight harvest For highbay application RJ12 connector IP64 The cable length is around 30cm. Lens Accessories B.
  • Page 3 Using HIR09x, HIR10 with HC038V & HCD038 HC038V 1-10V Control Base A PIR sensor head with 1-10V dimming output, the linear shape control base HC038V can be built behind the PCB board. It is also perfect for applications where space is restricted for cables and externally mounted lighting controls.

  • Page 4: Wire Preparation

    Dimensions and Terminals Control Base A. HC038V (1-10V output) RJ12 connector Push L’ 1-10V- 1-10V+ B. HCD038 (DALI output) RJ12 connector DALI Push 110.5 Wire Preparation 16 - 18 AWG To make or release the wire from the terminal, use a screwdriver to push down the button. Wiring Diagram 1-10V version LED Driver...
  • Page 5 Daylight Harvest and Lux Off Function The built-in photocell performs the function of reading the natural daylight, and maintaining the lux level by calculating how much arti cial light is needed according to the target lux level required by the pro le preset. Of ce Application Light will not switch on The light switches on...
  • Page 6 Alternating current Using HIR09x, HIR10 with Hytronik Hex-Drive Constant Current LED Drivers By simply connecting either HIR10 or HIR10L to the RJ12 connector, the LED driver is automatically enabled for control via the sensor and remote control.

  • Page 7: Technical Data

    Technical Data The following data is given as an overview of the Hex-drive range for reference in accordance with the HBT01 and HBT02 wireless technology products. For full data, please refer to our dedicated Hex-drive datasheets. Model No. HED1025 HED1045 HED1050H HED1050L HED1080H...
  • Page 8 Dimensions and Terminals Model: HED1025 1x25W DIP switch (for LED current selection) LED + LED - Switch-Dim DALI RJ12 (sensor antenna) DALI 254.6 Model: HED1050H 1x50W high current HED1050L 1x50W low current HED1080H 1x80W high current DALI RJ12 sensor antenna DALI 1-10V - 1-10V +...

  • Page 9: Hardware Features

    Model: HEC7030/BF 1x30W DALI2 DALI1 PUSH RJ12 98.9 DIP switch (for LED current selection) LED - LED + Transceiver Node Connections (with optional Switch-Dim) Wire Preparation LED + 0.5 - 1.5 Switch-Dim RJ12 To make or release the wire from the terminal, HIR10/ use a screwdriver to push down the button.
  • Page 10 Settings (Remote Control HRC-11) Permanent ON/OFF function Press button “ON/OFF” to select permanent ON or permanent OFF mode. * Press button “AUTO”, “RESET” or “Ambient” to quit this mode. Reset Settings Press button “RESET”, all settings go back to default values as below: Detection Range100%, Hold-time 5S, Stand-by Period 10S, Stand-by dimming level 10%, daylight threshold Disabled Shift Button...
  • Page 11 Ambient daylight threshold 1. Press button “Shift”, the red LED starts to ash. 2. Press button “Ambient”, the surrounding lux level is sampled and set as the new daylight threshold. Hold-time Press buttons in zone “hold-time” to set the hold-time at 2s / 30s / 1min / 5min / 10min / 15min / 20min / 30min. Note: 1.

This manual is also suitable for:

Hir10Hir09/sHir09/fHir09/c

Table of Contents