Subscribe to Our Youtube Channel
Related Manuals for PHENYX PRO PTAU-2
Summary of Contents for PHENYX PRO PTAU-2
- Page 1 PTAU-2 Advanced True Diversity Dual-Channel Wireless Microphone System USER MANUAL Benutzerhandbuch Manuel de l'Utilisateur Manuale d'uso Manual del usuario Manual do usuário...
-
Page 2: Important Safety Instructions
Licensing of PHENYX PRO wireless microphone equipment is the user's responsibility, and licensability depends on the user's classification and application, and on the selected frequency. PHENYX PRO strongly urges the user to contact the appropriate telecommunications authority concerning proper licensing, and before choosing and ordering frequencies. -
Page 3: Fcc Information
FCC Information IC Statement This device contains license-exempt transmitter(s)/ This device complies with part 15 of the FCC rules. Operation is subject to the following two receiver(s) that comply with Innovation, Science and conditions: Economic Development Canada's licence-exempt (1) This device may not cause harmful RSS(s). -
Page 4: Table Of Contents
Thank you for purchasing the Phenyx Pro PTAU-2. For the best results and utmost satisfaction with your new unit, please read this manual carefully to ensure proper operation, and keep it for future reference. For more information, please visit our store: www.phenyxpro.com Table of Contents System Description..........................5... -
Page 5: System Description
System Description System overview Discover the Phenyx Pro PTAU-2 system and experience the joy of effortless control with the system's precise shuttle jog dial. This feature strips away the complexity of traditional multi-button setups, allowing you to navigate functionalities with a intuitive twist. It’s not just about control—it’s about enjoying every moment at the helm of your audio experience. -
Page 6: System Components
System components Your system comes with a combination of the following components. Receiver Accessories 1 x Dual-channel Wireless Receiver 1 x 1/4” Audio Cable 4 x Antennas 4 x AA Batteries Transmitter 1 x Power Adapter 2 x Handheld Transmitters 1 x 6.35MM to 3.5MM Adapter 1 x User Manual Functions of Parts... - Page 7 Rear panel ⑥ ⑦ ⑧ ⑧ ⑨ ⑩ ⑨ ⑧ ⑧ ⑥ Adapter cord tie-off: For cable management. ⑦ Power jack ⑧ Antenna jacks ⑨ Balanced XLR output jacks: The XLR audio output jacks accept a balanced XLR connector. Each channel has its corresponding XLR output jack. ⑩...
-
Page 8: Transmitter
Transmitter ① Power button: Short press to turn it on and long press to turn it off. When the transmitter is powered on, short press the power button to mute it. ② LCD screen ③ IR window: For infrared synchronization setup. ②... -
Page 9: Operation Guidance
Operation Guidance System setup Step 1: Connect and power up the receiver ① Connect antennas to the receiver via ANT jacks. ② Connect the power supply to the receiver via the power jack. ③ Connect the audio output to an amplifier/speaker or mixer via the 1/4”... - Page 10 Step 2: Turn on transmitters ① Install fresh batteries with the correct polarity. ② Short press power buttons to turn on transmitters. ② ① Step 3: Select desired frequency ① Long press the SYNC/MENU Button of channel A or B to access the function menu of each channel.
-
Page 11: Receiver Menu
Step 4: Pair up the receiver and transmitters ① Unscrew the battery compartment. ② Short press the SYNC Button on the receiver to initiate the IR synchronization. ③ Vertically aim the IR window of a transmitter to that of the receiver. ④... - Page 12 2 - RF. SET The RF SET function is used to select frequency group. Each group has 100 available frequency channels. ① Tap the jog wheel to enter the RF. SET function menu. ② Twist the jog wheel to select your desired frequency channel.
- Page 13 ① Tap the jog wheel to enter the ID Lock function menu. ② Twist the jog wheel to cycle through ON/OFF (select ON to lock the ID, or OFF to leave the ID unlocked). ③ Press the jog wheel to select ON/OFF (the selected option will flash).
- Page 14 ① Tap the jog wheel enter the Tx. SET function menu. ② Twist the jog wheel to select the desired gain of the transmitter and tap the jog wheel to confirm it. ③ Twist the jog wheel to select transmitter power and tap the jog wheel to store the Tx.
-
Page 15: Troubleshooting
Troubleshooting Problem Solution • Place the receiver at least 120 cm above the ground, ideally at the top of a rack. If the receiver is installed in a case, extend the antennas outside to enhance signal reception. • Reset the receiver frequency to be about 30 frequencies Short receiving distance apart from the original one, then re-pair. -
Page 16: Specification
Specification • Overall System Frequency Range 512-562 MHz Modulation Mode Available Bandwidth 25 KHz per channel Number of Frequencies 2 x 1000 Frequency Stability ±0.005% Dynamic Range >110 dB Peak Deviation ±45 KHz Frequency Response 60 Hz-18 KHz (±3 dB) S/N Ratio >105 dB Total Harmonic Distortion... -
Page 17: Technical Support & Warranty Information
If you are receiving a system that is defective or you have any questions regarding operation or warranty cover, please contact us at support@phenyxpro.com with any questions or concerns and a Phenyx Pro representative will contact you to provide assistance. You can also reach out to us through Facebook page: www.facebook.com/phenyxusa/ or our official website: www.phenyxpro.com. - Page 18 Made in China Manufacturer: Guangzhou VILAN Technology CO., LTD. Address: No.101 Wanggangdexing Road, Baiyun District, Guangzhou, China www.phenyxpro.com After-sales Service E-mail: support@phenyxpro.com ; info@phenyxpro.com...
Need help?
Do you have a question about the PTAU-2 and is the answer not in the manual?
Questions and answers