Remote Programming With Mct 10 Set-Up Software - Danfoss VLT FC 100 Operating Instructions Manual

Programming
5.6 Remote Programming with MCT 10 Set-
up Software
Danfoss has a software program available for developing,
storing, and transferring frequency converter
programming. The MCT 10 Set-up Software allows the user
to connect a PC to the frequency converter and perform
live programming rather than using the LCP. Additionally,
all frequency converter programming can be done off-line
and simply downloaded to the frequency converter. Or the
entire frequency converter profile can be loaded onto the
PC for back up storage or analysis.
5 5
The USB connector or RS-485 terminal are available for
connecting to the frequency converter.
MCT 10 Set-up Software is available for free download at
www.VLT-software.com. A CD is also available by requesting
part number 130B1000. The Operating Instructions, provide
detailed information on how to programme using the MCT
10 Set-up Software.
48
®
VLT HVAC Drive D-Frame
Operating Instructions
®
MG16D202 - VLT is a registered Danfoss trademark