NETGEAR FVX538 - ProSafe VPN Firewall 200 Router Reference Manual page 44

ProSafe VPN Firewall 200 FVX538 Reference Manual
• Port Speed – In most cases, your router can automatically determine the connection speed
of the Internet (WAN) port. If you cannot establish an Internet connection and the Internet
LED blinks continuously, you may have to manually select the port speed. AutoSense is
the default.
If you know that the Ethernet port on your broadband modem supports 100BaseT, select
100M; otherwise, select 10M. Use the half-duplex settings unless you are sure you need
full duplex.
• Router's MAC Address – Each computer or router on your network has a unique 32-bit
local Ethernet address. This is also referred to as the computer's MAC (Media Access
Control) address. The default is Use default address. However, if your ISP requires MAC
authentication, then select either
– Use this Computer's MAC address to have the router use the MAC address of the
computer you are now using, or
– Use This MAC Address to manually type in the MAC address that your ISP expects.
The format for the MAC address is XX:XX:XX:XX:XX:XX (numbers 0-9 and either
uppercase or lowercase letters A-F). If you select Use This MAC Address and then type
in a MAC address, your entry will be overwritten.
2-18 Connecting the FVX538 to the Internet
v1.0, March 2009