Configuring The Wan Mode (Required For Dual Wan) - NETGEAR FVX538 - ProSafe VPN Firewall 200 Router Reference Manual

ProSafe VPN Firewall 200 FVX538 Reference Manual
Table 2-2. Traffic Meter Settings
Parameter Description
Increase this Use this to temporarily increase the Traffic Limit if you have reached the monthly
month's limit limit, but need to continue accessing the Internet. Check the checkbox and enter the
desired increase. (The checkbox will automatically be cleared when saved so the
increase is only applied once.)
This month's limit This displays the limit for the current month.
Restart traffic This determines when the traffic counter restarts. Choose the desired time and day of
counter the month.
Restart Counter at a Check this radio button to restart the Traffic Counter at a specific time and day of the
Specific Time month. Fill in the time fields and select AM or PM and the day of the month from the
pull-down menus.
Send E-mail Report If checked, an E-mail report will be sent immediately before restarting the counter.
before restarting You must configure the E-mail screen in order for this function to work (see
counter Notifications of Event Logs and Alerts" on page
When limit is Select the desired option:
reached • Block all traffic - all access to and from the Internet will be blocked.
• Block all traffic except E-mail - Only E-mail traffic will be allowed. All other traffic will
• If using this option, you may also select the Send E-mail alert option. You must
Internet Traffic This displays statistics on Internet Traffic via the WAN port. If you have not enabled
Statistics the Traffic Meter, these statistics are not available.
Traffic by Protocol Click this link if you want to know more details of the Internet Traffic. The volume of
traffic for each protocol will be displayed in a sub-window.Traffic counters are
updated in MBytes scale, counter starts only when traffic passed is at least 1MB.

Configuring the WAN Mode (Required for Dual WAN)

The dual WAN ports of the ProSafe VPN Firewall 200 can be configured on a mutually exclusive
basis for either auto-rollover (for increased system reliability) or load balancing (for maximum
bandwidth efficiency).
• Auto-Rollover Mode. In this mode, the selected WAN interface is made primary and the other
is the rollover link. As long as the primary link is up, all traffic is sent over the primary link.
Once the primary WAN interface goes down, the rollover link is brought up to send the
traffic.Traffic will automatically roll back to the original primary link once the original
primary link is back up and running again.
2-8
be blocked.
configure the E-mail screen in order for this function to work.
v1.0, March 2009
4-39).
Connecting the FVX538 to the Internet
"E-Mail